use in conjunction with the 2291 steering wheel puller to remove steering wheels on late model gm vehicles that are not pre-drilled to receive standard bolts. applications include - cadillac 1997 and new catera chevrolet-gmc 1997 and newer malibu corvette 1998 and newer c- and k-series trucks full-sized vans astrolsafari vans buick 1997 and newer park avenue and regal oldsmobile oldsmobile 1997 and newer cutlass pontiac 1988-1993 lemans 1997 and newer grand prix and trans sport van includes bushing to cover the following applications - ford 1997-current explorer ranger pickups chrysler 1999 jeep grand cherokee
$30.38
Related Products
Here are other marine supplies you may be interested in.
features and benefits: works on 1969-current gm chrysler and ford vehicles with saginaw steering columnsthis tool makes tilt steering columns much easier to service.
$42.24
includes steering wheel puller pulls sheering wheels on most us and imported cars. includes special bolts for use on gm vehicles with sir units to avoid damage to steering column. five sets of side bolts included. can also be used to remove crankshaft pulleys on chrysler 2.2 and 2.5l engines. steering wheel lock plate tool gm steering wheel puller legs
$85.36
features and benefits: works on pulleys with hub diameters of 1-1/8" 1-1/4" 1-5/16" and 1-3/8" with split collet design the jaws grip the pulley flange for damage-free removal mechanical screw power the 7185 tool removes pulleys on most chrysler ford gm and vw vehicles including saginaw thompson and the ford c2 power steering pumps; gm belt-driven vacuum pumps on both gas and diesel cars; and press-on water pump pulleys on gm 4-cylinder and v-6 engines.
$63.09
features and benefits:this puller removes steering wheels on most domestic and imported vehicles with or without telescoping steering columns. five sets of cap screws are included for various thread requirements. the forcing screw features a swivel end to protect steering shaft. cap screws included (pairs): 3/8-16 x 3-1/2; 5/16-18 x 3-1/2; 5/16-24 x 3-1/2; m8-1.25 x 90 mm; and 5/16-18 x 4 (sir). bar measures 4" x 1" x 1".
$57.68
Precise steering control for high-speed outboard boats SeaStar PRO outboard steering systems are the choice for high speed single-engine outboard boats, like bass, flats, combo race/ski and other performance boats with speeds above 65mph. Recommended for single non-power-assisted outboards up to 300hp. SeaStar PRO has steered the Bass Masters Classic since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. The kit includes a 2.0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout. Match the helm with Kevlar reinforced HO57XX hoses. Meets ABYC standards and NMMA requirements. Horsepower: Single engine 300hp; dual engine 600hp Speed: 60mph + Helm: 2.0 cu.ft. capacity Hose: Kevlar reinforced, 1500PSI Turns Lock-to-Lock: 4.25 Included equipment: Helm pump, cylinder, bleeder kit. Hoses sold separately. (Uses HO57XX series) Steering Wheel: Not included Steering Wheel Shaft: 3/4" tapered Warranty: Two years For PDF's of Teleflex documentation, including the BayStar/SeaStar Selection Guide and Installation Books, click here
$1049.00
features and benefits: carries top mounted and side mounted terminal batteries ends are marked and sized to accurately fit positive and negative terminals strong plastic strap is not harmed by battery acid strap is 14" long can also be used as a charging adapter on side mounted terminal batteries.changing the battery in your automobile don t struggle! kd has made it simple and hassle free. with this strap it allows an accurate fit to the terminals for easy carrying! it s also acid resistant! doesn t get any easier than that! made for everyday use.
$36.53