features works on ford gm and chrysler vehicles with saginaw fits 1.125 1.25 1.3125 1.375 inch pulley hub diameters includes spacer for power steering pump pulley installation on chrysler cirrus-stratus-breeze
$45.99
Related Products
Here are other marine supplies you may be interested in.
pulls steering wheel on most makes of late model cars. supplied with five pairs of cap screws: 3/8-16 x 3-1/2"; 5/16-18 x 3-1/2"; 5/16-24 x 3-1/2"; m8-1.25 x 90mm; and 5/16-18 x 4" (sir). can also be used as a regular 2/3-way puller to remove pulleys small engine and snowmobile flywheels. works on nearly all gm ford and chrysler automobiles with or without collapsible steering columns.
$52.52
45000 steering wheel pullerfeatures and benefits: universal puller for most makes and models. screw pad protects end of steering shaft. heavy duty for long wear.includes the following parts: 45020 puller screw 45050 screw pad 45090 puller frame (2) 45200 3/8" - 16 bolt (2) 45210 5/16" - 18 bolt (2) 45220 5/16" - 24 bolt clam shell package. shipping wt. 1 lb. 5 oz.
$33.02
features and benefits: removes the stabilizer link to replace struts on taurus sable and windstar easily removes the top steering stabilizer link so that strut can be replaced hardened socket fits the stem hex 8mm socketeasily removes the top steering stabilizer link so the strut can be replaced. place the holding tool over the 18mm steering link nut. the hardened socket fits the stem hex. turn the 8mm socket with a ratchet to remove.
$32.88
features and benefits: use with the no. 7249 ball joint set to remove or install aftermarket and original equipment upper and lower ball joints and the offset ball joints used to change caster/ camber. works on: 1984-newer "downsized" jeep wagoneer and 2wd and 4wd cherokee and comanche; 1987-newer jeep wrangler; 1990-newer jeep renegade; 1993-newer jeep grand cherokee; 1994-newer dodge ram 1/2-ton 4wd pickup wt. 3 lbs.
$122.83
Precise steering control for high-speed outboard boats SeaStar PRO outboard steering systems are the choice for high speed single-engine outboard boats, like bass, flats, combo race/ski and other performance boats with speeds above 65mph. Recommended for single non-power-assisted outboards up to 300hp. SeaStar PRO has steered the Bass Masters Classic since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. The kit includes a 2.0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout. Match the helm with Kevlar reinforced HO57XX hoses. Meets ABYC standards and NMMA requirements. Horsepower: Single engine 300hp; dual engine 600hp Speed: 60mph + Helm: 2.0 cu.ft. capacity Hose: Kevlar reinforced, 1500PSI Turns Lock-to-Lock: 4.25 Included equipment: Helm pump, cylinder, bleeder kit. Hoses sold separately. (Uses HO57XX series) Steering Wheel: Not included Steering Wheel Shaft: 3/4" tapered Warranty: Two years For PDF's of Teleflex documentation, including the BayStar/SeaStar Selection Guide and Installation Books, click here
$219.99
RoadPro RPSW-3002 18 Comfort Grip Steering Wheel Cover - Black Massaging
$25.08