MarineSupplyStore.com Featuring The Best Selection In Marine Supplies Online

Swivels ride on two rows of ball bearings for smooth, effortless pivoting even under high loads. Use #144 and #205 for mainsheets on dinghies and small offshore boats. #144 has a tall arm for use with bigger blocks. The low-profile 205 is used at the deck level and when smaller blocks are used. The 240 and 241 are used for main and jib sheets on very small boats or for control lines on boats of all sizes.

Reduce deck clutter, tie spring lines, fenders, dinghies, etc. onto this moveable, low-profile, heavy-duty cleat. The spring-loaded cleat fits on 1" and 1-1/4" T-track, so you can make quick and easy position changes without tools. Made of corrosion-resistant, polished, investment cast 316 stainless, this strong, adjustable cleat can also be used as a chock. To install, simply remove track end stop, slide on the cleat and lock into desired position. Short track lengths can be installed for using the cleat in other locations aboard.

Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45 to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38 . Bearings: Plain bearing Shackle/Strap Type: 45 stand-up-spring shackle on T-Track slider Configuration: Genoa lead block, 1" or 1-1/4" T-Track Features: Lined low-friction slide with spring-loaded pin

Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45 to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38 . Bearings: Plain bearing Shackle/Strap Type: 45 stand-up-spring shackle on T-Track slider Configuration: Genoa lead block, 1" or 1-1/4" T-Track Features: Lined low-friction slide with spring-loaded pin

Replaces Schaefer standard, integral toggle link to raise bottom drum assembly off deck to clear anchor windlasses, bow rollers or anchors.

One convenient package, all of the Ball & Socket deck hinges, top caps, and jaw slides needed for 4-bow canvas tops. Designed for universal use Will fit existing side curtains, canvas, and tube Easy operation and a tight fit Delrin insert eliminates rattle Polished, marine grade 316 stainless steel

Reduce deck clutter, tie spring lines, fenders, dinghies, etc. onto this moveable, low-profile, heavy-duty cleat. The spring-loaded cleat fits on 1" and 1-1/4" T-track, so you can make quick and easy position changes without tools. Made of corrosion-resistant, polished, investment cast 316 stainless, this strong, adjustable cleat can also be used as a chock. To install, simply remove track end stop, slide on the cleat and lock into desired position. Short track lengths can be installed for using the cleat in other locations aboard.

Highly polished stainless steel cleat with an open base is one of the most popular cleats found on most boats. Sleek, modern design makes decks look stylish while providing the ultimate in corrosion protection when anchoring or docking.

High load rating and versatility make Ronstan Series 75 ratchet blocks a great choice Ronstan's Series 75 ratchet blocks provide exceptional holding power in a strong, lightweight block. Sized for mainsheet applications on powerful dinghies and sport boats, they combine with the RF8 mainsheet swivel base. Great also for sport boat spinnaker sheets or vang, furler and other control line uses on larger boats. An On/Off switch is fitted to both sides of the block, so it can be used for either port or starboard orientation, or one side's switch can be removed if desired. The switch mechanism is unique, because it can be operated under load to engage or disable the ratchet mechanism. New low-profile pivoting lead blocks maintain alignment and keep lines as close to the deck as possible. All of the configurations can be disassembled for servicing or customization. Sheave: Extruded aluminum with patented hole design for enhanced line holding Ball Bearings: Carbon black acetal ball bearings Sheave Size: 3" (75mm) Line Dia: 1/2" (12mm) Cheek Material/Finish: Anodized aluminum cheek plates Shackle/Strap Type: Swivel head post is lockable at 0 and 90 with Allen screw Ratchet: Up to 14:1 holding power